Moria Evolution 3E Epi-K Microkeratome System

Moria Evolution 3E Microkeratome Console w Epi K Motor & Rings
This unit has been fully tested and serviced by our trained technicians. This unit includes the Evolution 3E Console, Epi-K Motor, Two Epi-K -1 Rings, Foot Switch, Vacuum Pedal and Carrying Case. The system has been fully serviced including a new battery.

The Evo 3E is the most versatile system in the Moria lineup, and their most current console. This system is designed to run any of the Moria systems to include the Epi K (included), M2 (not included) and One Use Plus (not included).

MORIA’ s console offers a wealth of features to enhance performance, safety, flexibility, and ease-to-use:

  • Two forward speeds allow customization of flap thickness, as well as flexibility to manage various corneal geometries.
  • Two high performance pumps rapidly create stable vacuum.
  • Low vacuum option facilitates extremely gentle flap manipulation on reverse pass and secure globe fixation during laser ablation.
  • “Slow vacuum release” option provides gentle onset and release to minimize patient discomfort and potential retinal trauma.
  •  Runs on wall current, with built-in back up battery for uninterrupted use.
  •  Continuously monitors all key parameters and confirms status through visual and audible signals.
  •  Operates the Epi-KTM, the One-Use-Plus, the M2 Single Use and the ALTK-CBm System for corneal keratoplasty.

Moria Evolution 3E Microkeratome Console Specifications

  • Dimensions 430 x 240 x 190 mm
  • Weight 13.6 kg
  • Ambiant temperature 15°C to 35°C (59°F to 95°F)
  • Non-condensing humidity 45% to 75%
  • Voltage/cycles 115 V / 50-60 Hz
  • 230 V / 50-60 Hz
  • External fuse External fuse
  • Battery capacity and type (inside the control unit) Battery capacity and type (inside the control unit)
  • Fuse (inside the control unit) Fuse (inside the control unit)

Epi-K

  • The unique design and intelligent features of Moria Epi-K have made it the leader in the US epikeratome market(1).
  • Epi-LASIK is a refractive procedure performed with an epikeratome which mechanically cleaves the epithelium from the Bowman’s membrane, leaving a pristine optical zone for laser ablation. The epithelial flap can then either be discarded or repositioned, according to the surgeon’s preference.

Many surgeons have made Epi-LASIK their procedure of choice for surface ablation. With the Epi-K and the latest refinements in technique and postoperative care, Epi-LASIK produces faster healing and visual recovery than all other surface ablation procedures

The optimal design for safe, reliable separation time after time

  • Handpiece with two independent motors for fast separator oscillation and safe advancement rate.
  • Metal separator with proprietary edge geometry specifically for cleaving rather than cutting.
  • Disposable plastic head encases each separator for added safety and convenience.
  • Unique large applanation plate provides yet an additional margin of safety.
  • Several suction rings with adjustable stops to customize the epithelialflap diameter.
  • Large diameter suction ring for hyperopes, flat corneas, wavefront-guided ablations, and lasers requiring large ablation zones.
  • Single-Use suction ring option.

More photos available! Just ask.

Moria Evolution 3E SBK One Use Plus Microkeratome System

MORIA EVO 3E One Use Plus Microkeratome System SBK with Evolution Console and Foot Pedals

This rare Moria One Use Plus is in excellent refurbished condition and has been completely serviced by our trained technicians. The console has also been serviced including a new battery.
The system includes everything shown in the photos:

One Use Plus Motor with case

  • Evolution 3E Console (also compatible with Epi K and M2 motors)
  • Foot Pedals and accessories as shown

This microkeratome is in pristine condition and has been refurbished by our staff.

MORIA’ s console offers a wealth of features to enhance performance, safety, flexibility, and ease-to-use:

  •  Two forward speeds allow customization of flap thickness, as well as flexibility to manage various corneal geometries.
  • Two high performance pumps rapidly create stable vacuum.
  •  Low vacuum option facilitates extremely gentle flap manipulation on reverse pass and secure globe fixation during laser ablation.
  •  “Slow vacuum release” option provides gentle onset and release to minimize patient discomfort and potential retinal trauma.
  •  Runs on wall current, with built-in back up battery for uninterrupted use.
  •  Continuously monitors all key parameters and confirms status through visual and audible signals.
  •  Operates the Epi-KTM, the One-Use-Plus, the M2 Single Use and the ALTK-CBm System for Corneal Keratoplasty.

Console Specifications:

  • Dimensions 430 x 240 x 190 mm
  • Weight 13.6 kg
  • Ambiant temperature 15°C to 35°C (59°F to 95°F)
  • Non-condensing humidity 45% to 75%
  • Voltage/cycles 115 V / 50-60 Hz
  • 230 V / 50-60 Hz
  • External fuse
  • Battery capacity and type (inside the control unit)
  • Fuse (inside the control unit)
  • Inlet: console supply
  • Outlet: turbine supply
  • Type of protection against electric shock
  • Compliance IEC 60601-1CE 0120
  • Medical device of class IIa according to EC directive
  • 93/42/EEC and 2007/47/EEC

More photos available! Just ask.

Moria Evolutuon 3E Microkeratome Console

Refurbished Moria Evolution 3E Console & Foot Pedals (does not include motors or heads/rings)

Fully serviced by our trained staff! Very hard to find Evo 3E Console with Foot Pedals. This console can be used with a variety of Moria microkeratome motors and accessories including One Use Plus, M2, CB and more. 
 
The console is fully serviced and working to the manufacturers specifications.
 
Please note that there are NO motors, rings, heads or any other accessories included. This console is designed for a user looking for an extra or spare console to use with their existing handpieces/motors or keratome.  

Console Specifications:

  • Dimensions 430 x 240 x 190 mm
  • Weight 13.6 kg
  • Ambiant temperature 15°C to 35°C (59°F to 95°F)
  • Non-condensing humidity 45% to 75%
  • Voltage/cycles 115 V / 50-60 Hz
  • 230 V / 50-60 Hz
  • External fuse
  • Battery capacity and type (inside the control unit)
  • Fuse (inside the control unit)
  • Compliance IEC 60601-1
  • CE 0120
  • Medical device of class IIa according to EC directive
  • 93/42/EEC and 2007/47/EEC

Moria Evolution 3 Microkeratome Console

Refurbished Moria Evolution 3 Console & Foot Pedals (does not include motors or heads/rings

Fully serviced by our trained staff! Very hard to find Evo 3 Console with Foot Pedals. This console can be used with a variety of Moria microkeratome motors and accessories including One Use Plus, M2, CB and more. 
 
The console is fully serviced and working to the manufacturers specifications.
 
Please note that there are NO motors, rings, heads or any other accessories included. This console is designed for a user looking for an extra or spare console to use with their existing handpieces/motors or keratome.  

Console Specifications:

  • Dimensions 430 x 240 x 190 mm
  • Weight 13.6 kg
  • Ambient temperature 15°C to 35°C (59°F to 95°F)
  • Non-condensing humidity 45% to 75%
  • Voltage/cycles 115 V / 50-60 Hz
  • 230 V / 50-60 Hz
  • External fuse
  • Battery capacity and type (inside the control unit)
  • Fuse (inside the control unit)
  • Compliance IEC 60601-1
  • CE 0120
  • Medical device of class IIa according to EC directive
  • 93/42/EEC and 2007/47/EEC

Moria Epi-K Motor Handpiece

A Mechanical Automated Epikeratome

Epi-Kâ„¢ has a disposable head that offers the refractive surgeon the possibility to cleave the cornea instead of cutting it, and to reunite all the advantages of surface ablation and LASIK thanks to its innovative characteristics.

  • Automated and linear epikeratome
  • Pre-assembled and one-handed use possible
  • Dull metal separator with proprietary edge geometry specifically for cleaving rather than cutting
  • Disposable plastic head encases each separator for added safety and convenience
  • High precision cast molding ensuring reproducibility and predictability
  • Applanation plate providing yet an additional margin of safety
  • 2 electrical motors for independent translation and separator oscillation
  • Lightweight and ergonomic
  • Large diameter suction ring for hyperopes, flat corneas, wavefront-guided ablations, and lasers requiring large ablation zones
  • Single-Use ring option available