Fully Refurbished ENDURE Medical Alcon E7 OR Rolling Surgical Ophthalmic Microscope with ILLUMIN-i
Thank you for viewing our listing for this Endure Microscope.
This microscope have been fully tested and refurbished by our staff to ensure accuracy, quality and reliability.
- Excellent refurbished condition
- Serviced and inspected by our in-house technicians
- Includes Foot Switch and Manual
- All optics cleaned
- All functions tested
- New Bulb
Perfect for an Ophthalmologist looking for a reliable standard microscope to be used for cataract surgery or any other ophthalmic procedure in our industry.
Please don’t hesitate to contact us at any time for further information or photos.
The system comes with a foot pedal and XY alignment system that is foot pedal controlled by the surgeon.
The red reflex is outstanding and probably the best compared to any surgical microscope except the new ALCON LUXOR which is the next generation design of this scope.
WE SHIP WORLDWIDE and have experience shipping to over 100 countries around the world! Please email or message us for an international quote.
More photos available! Just ask.
Keep in mind we are not brokers. We are a full sales and service center. Each laser and piece of equipment we sell is hand picked, inspected, and tested by our technicians and engineers to ensure your order arrives in excellent condition both cosmetically and mechanically. Buy with confidence from Laser Locators!
Zeiss Visulas 532 Green Argon Laser w Integrated Slit Lamp & Factory Power Table
The Zeiss Visulas 532 Green Laser System comes completely integrated into a factory Zeiss slit lamp, fiber, console with remote and Zeiss factory power table. Fully refurbished, calibrated, and ready to go.
Excellent condition and very low use 532 green laser! We purchased this from the original owner who used the system sparingly over the years. The condition is excellent both mechanically and cosmetically. All functions are working and the laser energy is within 3% to 7% in all treatment ranges! These are excellent numbers for even a new laser. If you are looking for a low cost integrated solution 532nm green laser, this is it! Professional installation recommended, please contact us for a quote.
TUBE COMPOSITION
Voltage Vac: 115/230
Current, a: 8
Kva (POWER NEEDED): 600W maximum
WEIGHT, kg (lb) (DISPLAY): 37(81.4)
W x D, cm (in): 30x 44 (11.8 x 17.3)console
Type (CONFIGURATION): Frequency-doubled Nd:YAG
BEAM SPECIFICATIONS
Nd:YAG: 532
Nd:YAG: 1.2
AIMING BEAM TYPE: Red diode
WAVELENGTH: 670nm
Energy, mw (Delivered power, W): 0.1-1, 5 steps
DELIVERY MODES: Single, repeat, continuous wave
EXPOSURE TIME, sec (MICROMANIPULATORS): 0.01-2.5, continuous wave
Repeat time, sec (Delivered power, W): Up to 6 Hz, 10 steps
Spot diameter: 50-1,000 parfocal
DELIVERY SYSTEM
Slit lamp: Zeiss dedicated slit lamp based on SL-130
USES (STAINING POSTS): Retinal, peripheral, iridectomy, trabeculoplasty
OTHER SPECIFICATIONS (AIR SUPPLY): Switchable physician safety filter for slit lamps and surgical microscope; motorized micro- manipulator; diode-on-demand activates pumping diode only when footpedal is pressed; combined 532/Nd:YAG laser system (VISULAS Combi 532) available.
FDA CLEARANCE (Interference compensation): Yes
The VISULAS YAG III Combi from Carl Zeiss is the “multi-purpose” laser for retinal photocoagulation, secondary cataract treatment and for laser glaucoma therapies. At the push of a button you can switch between posterior and anterior laser treatment. This high performance combo device is designed for use even in rooms where space is at a premium. Both lasers – the VISULAS YAG III and the VISULAS 532s – fit snugly beneath the instrument table, freeing up a large amount of space and ensuring ample freedom of movement.
The VISULAS 532s is intended for use in photocoagulation, and the VISULAS YAG III is used for applications like posterior capsulotomy and iridotomy.
The Ellex Tango is without question the gold standard for SLT/Yag combo lasers around the world. This is the most desirable and most reliable SLT/Yag combination system on the market today.
Unit Includes
- Full 1 Year US Warranty
- Factory U-Recessed table
- Manuals & Original Literature
- Service reports
- Laser Safety glasses
- Dust Cover
- Laser Warning Sign
Tango combines a full-featured SLT laser with a powerful, precise YAG laser, helping you to better manage both OAG and ACG patients, while also providing a highly effective solution for capsulotomy procedures.
Featuring a proprietary, patented dual-mode laser cavity, which allows you to instantly and reliably, switch between SLT and YAG modes, combined with a custom-designed power supply that maintains optimum system stability for greater shot-to-shot consistency.
Tango allows you to perform SLT and YAG treatments with improved accuracy and greater efficacy over the long-term.
- Industry’s fastest firing rate at 3 shots per second: Proprietary cavity facilitates effective heat transfer and cooling, combined with rapid recharging of the pulse capacitors.
- Precise adjustment of parameter settings at 0.1 mJ increments: Automatic calibration process, combined with a series of test-fire sequences, uses feedback from the system’s energy monitor in order to constantly adjust system output.
- Lifespan of more than 400,000 shots: YAG optical Q-switch made from thermally matched, homogenous materials to withstand warping and erosion.
- Greater shot-to-shot consistency: Custom-built YAG power supply with micro-controller and energy compensation algorithm.
Tango in SLT Mode
Tango’s SLT mode delivers a gentle, non-invasive approach for stimulating the generation of healthy trabecular meshwork cells and managing intraocular pressure without the burn and scar tissue associated with other laser procedures. SLT is a highly effective approach for first-line glaucoma treatments, adjunct therapy with drugs, and alternative therapy when drugs or surgery fail.
Tango in YAG Mode
Tango’s YAG mode features an Ultra Gaussian spot profile and fast rise time which allow you to perform capsulotomies and iridotomies at lower, more efficient energy levels — delivering less energy to the eye. The result is that you can perform capsulotomies with all types of IOLs and with significantly less risk of lens pitting.
Specifications SLT Mode
- Laser Source: Q-switched, frequency doubled Nd:YAG
- Wavelength: green: 532 nm
- Energy: 0.3 to 2.6 mJ, per pulse, continuously variable
- Pulse Duration: 3 ns
- Burst Mode: single pulse only
- Spot Size: 400 μm
- Cone Angle: <3 degrees
- Posterior Offset: not applicable
Specifications YAG Mode
- Laser Source: Q-switched Nd:YAG
- Wavelength: green: 1064 nm
- Energy: 0.3 to 10 mJ, per pulse, continuously variable
- Pulse Duration: 4 ns
- Burst Mode: 1, 2 and 3 pulses per burst, selectable
- Spot Size: 8 μm
- Cone Angle: 16 degrees
- Posterior Offset: ± 100 to 500 μm, continuously variable
Common to Both
- Repetition Rate: up to 3 hertz
- Aiming Beam: red 635 nm, adjustable intensity
- Magnification: 10x, 16x, 28x
- Cooling: air cooled
- Electrical Requirements: 100-240 VAC, 50/60 Hz, 500 VA
- Weight: 31 kg, 68 lbs (laser only)
- Dimensions: 57 x 75 x 44 cm, 23 x 30 x 18 inches (laser only)
The IRIDEX IQ 810 ophthalmic laser system is the next generation infrared laser solution designed to perform traditional and MicroPulse procedures, including next-generation therapy for the treatment of glaucoma.
Multiple Therapeutic Indications
The IQ 810 is indicated for retinal photocoagulation, laser trabeculoplasty, transscleral cyclophotocoagulation, transscleral retinal photocoagulation, iridotomy, and other diode laser treatments.
CW-Pulse (Continuous-Wave) Mode
CW lasers deliver a steady stream of laser energy, even with the shortest exposure duration. This results in a significant thermal rise and consequent coagulation used clinically for many applications.
MicroPulse Mode
With MicroPulse technology, the steady CW emission is “chopped” into a train of shorter laser pulses, whose “duration” (“ON” time) and “interval” (“OFF” time) are adjustable by the surgeon. A shorter MicroPulse “duration” limits the time for the laser-induced heat to spread to adjacent tissues, thus providing more precise confinement of energy delivered. A longer “interval” between each MicroPulse provides additional time for tissue to cool. The “ON” time during the total period of “ON” + “OFF” time is referred to as a Duty Cycle. Duty cycles are represented as a percentage, and are adjustable from .4% to 50%, or presets of 5%, 10%, and 15%.
